Quick answer: A weigh-and-fill machine weighs each portion of coffee and drops it into the bag, so nobody scoops and tops up by hand. SOVDA makes two, both for whole-bean coffee. The Precision Fill Mini 2 sits on a table and suits small teams and retail bags. The Precision Fill stands on the floor and suits daily packing and big wholesale bags. Compared with other weigh-and-fill machines, both are built for one job, whole beans, and for speed at it. If you pack ground coffee, or you want a machine that also seals the bag, a different type of machine is the better fit.
If you are comparing fillers, you already know the job. Someone on your team stands at a scale, scoops, checks, adds three beans, takes one out, and does it again a few hundred times. The question is which machine should take that over.
This guide covers the types of weigh-and-fill machines a roastery can choose from, how our two machines compare with the others, and the questions to ask about any filler before you buy. That includes ours.
There are four ways to get a weighed portion of coffee into a bag. One of them fits most specialty roasteries.
Filling by hand
A person scoops, checks the scale and tops up. It is slow, and the result depends on who is filling.
Best for a few dozen bags a week
Weigh-and-fill machine
A scale inside the machine weighs each portion and drops it into the bag you hold. You seal the bag yourself.
Best for most roasteries that pack whole beans
Precision Fill Mini 2 and Precision Fill are this type.
Auger filler
A turning screw meters out ground coffee. It is not made for whole beans.
Best for ground coffee
Automatic bagging line
The line weighs, opens, fills and seals every bag. This is industrial packaging machinery, with the price and floor space to match.
Best for large roasteries with long runs of one bag
Most of the machines a specialty roastery ends up comparing are weigh-and-fill machines, so the rest of this guide stays with that type.
Machines of this type look alike on a spec sheet. The differences show up at the packing table.
Many weigh-and-fill machines move the whole portion along a vibrating tray, quickly at first and then slowly as the scale gets close to the target. Our fillers work differently. Most of the weight drops in at once, and a vibratory feeder adds the last few beans until the scale reads your target.
The result is a filler that keeps up with the person holding the bag. Every machine slows down as bags get bigger, so when you compare, ask for bags per minute at the bag size you sell most.
Every gram over the label weight is coffee you give away, and a bag under it is a problem with your customer. Ask each vendor how close to the target weight the machine lands, in grams. If a spec sheet gives no figure for speed or accuracy, ask for one before you compare prices.
The Precision Fill Mini 2 covers everything from sample bags to mid-size wholesale bags. The Precision Fill goes up to large wholesale bags. On both, each bag size is saved as a recipe, so changing over means picking the recipe on the screen. For an unusual bag, we make a custom filler head.
Both machines fill whole beans only, roasted or green. That focus is a choice. Whole beans and ground coffee flow very differently, and a machine built for one job can be more exact at it. If ground coffee is a big part of what you pack, you need a different filler for it.
The Precision Fill Mini 2 sits on a sturdy table and plugs into a normal outlet. The Precision Fill stands on the floor and needs some ceiling height, so send us your floor plan and we check the fit. Both need a small air compressor. Some weigh-and-fill machines run without compressed air, so if you have no compressor and do not want one, put that on your list.
A filler is only as fast as the person refilling it. The Precision Fill has the bigger hopper, and a SOVDA Lift can feed either machine, so nobody carries buckets to it. With any filler, ask how the coffee gets into the hopper and how high someone has to lift it.
You set up both machines yourself with our guide. Then we get on a call with your team and dial in each recipe until it lands on weight. Setup, training and a 1-year warranty are included. Roasteries have packed with the Precision Fill since 2019, and the Precision Fill Mini 2 won Best New Product in the Open Class at the Specialty Coffee Association's 2026 awards.
When you compare quotes, compare the delivered price, and check whether shipping, duties, setup and training are included. Starting prices for both of our fillers are in the overview below.
Tabletop
Precision Fill Mini 2
For small teams and retail bags.
Bag sizeUp to 2.3 kg (5 lb)
SpeedUp to 15 bags a minute
AccuracyWithin ±2 g
PriceFrom $6,990
Floor-standing
Precision Fill
For daily packing and big wholesale bags.
Bag sizeUp to 4.5 kg (10 lb)
SpeedUp to 18 bags a minute
AccuracyWithin ±2 g
PriceFrom $8,950 ($9,950 in the US)
Both fill whole beans only and need a small air compressor. Neither seals the bag.
Small roastery, or packing on your own? The Precision Fill Mini 2 is usually enough. A team that packs most days, or big wholesale bags? Look at the Precision Fill. Every spec for both machines is in our filling machine buying guide.
Our fillers are not the right answer for every roastery. Look elsewhere if one of these is true.
High volume alone is not a reason to change type. For thousands of bags a week, a Precision Fill with a SOVDA Lift is the setup we recommend.
Then have the vendor check your bags and your space before you pay. We do both before you order.
A weigh-and-fill machine weighs a set portion of product and releases it into a bag or container. In a coffee roastery it replaces scooping and topping up by hand. The operator holds or places the bag, and sealing is a separate step.
It is built only for whole-bean coffee. Most of each portion drops in at once and a vibratory feeder tops up the rest, which makes it fast and exact. A SOVDA Lift can feed it, so the hopper stays full while you pack.
For whole beans in retail bags, a tabletop weigh-and-fill machine is usually enough. The Precision Fill Mini 2 fits on a table and plugs into a normal outlet. If you mostly pack ground coffee, look at an auger filler instead.
A floor-standing weigh-and-fill machine for bigger bags and higher volume, an auger filler for ground coffee, an automatic bagging line for very long runs, or filling by hand with a scale for very small volumes.
By hand, one person fills about 2 to 3 bags a minute. The Precision Fill Mini 2 fills up to 15 bags a minute and the Precision Fill up to 18, depending on bag size.
No. Precision Fill and Precision Fill Mini 2 fill whole beans only, roasted or green.
No. A weigh-and-fill machine fills the bag, and you seal it with your own sealer. Machines that also open and seal the bag are automatic bagging lines.
Some do and some do not. Precision Fill and Precision Fill Mini 2 both need a small air compressor.
It depends on the type and size. Starting prices for both SOVDA fillers are in the overview above, and setup, training and a 1-year warranty are included.
Not sure which filler fits your roastery? Talk to Sales. Tell us your bag sizes and weekly volume, and we will tell you if one of ours fits.